KESSEL sets standards in backwater protection
KESSEL sets standards in backwater protection
With the new premium backwater valve series Staufix SWA, Staufix FKA and Pumpfix F, KESSEL is setting standards in protection against backwater and flooded basements. This means that installation professionals and home owners both profit from a flexible modular system, innovative installation, operation and maintenance solutions and the very highest quality and safety of the KESSEL backwater valves.
Backwater pumping station Pumpfix F
Backwater pumping station for wastewater with or without sewage. For interior installation in a concrete slab/floor or for installation in an exposed wastewater pipe. Available inlets / outlets Ø 110 – Ø 200.
Backwater valve Staufix FKA
Automatic backwater valve for wastewater with or without sewage. For interior installation in a concrete slab/floor or for installation in an exposed wastewater pipe. Available inlets / outlets Ø 110 – Ø 200.
Backwater valve Staufix SWA
Backwater valve for wastewater (check your country’s EN 13564 backwater valve requirements for what type of valve is certified for use in your situation). For interior installation in a concrete slab/floor or for installation in an exposed wastewater pipe. Available inlets / outlets Ø 110 – Ø 200.
Pumping stations for outdoor underground installation
Up to now, lifting stations for the disposal of wastewater occurring below the level of the sewage channel have mainly been installed in buildings. In the meantime, however, new methods are being pursued. In order to gain more useful space in the basement and enhance living comfort by getting rid of pumping operation noise, a service and inspection chamber housing the lifting station is installed outside the building. Depending on the requirements, pumps for wastewater with and without sewage, single and twin stations can be fitted in the various in-house developed pumping stations.
Pumping stations for wastewater with sewage (black water)
Aqualift F
Favourably priced pumping station Aqualift F with macerating / cutting pumps in compact chamber system Ø 600. Pressure pipe connection Ø 40 mm.
Aqualift F XL (ATEX)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage (ATEX version). The tank volume is approx. 680 litres, the maximum pumping volume is between 300 and 310 litres. Pressure pipe connection Ø 90 mm.
Aqualift F XL (Multi-vane impeller)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage (Multi-Vane Impeller). The tank volume is approx. 680 litres, the maximum pumping volume is approx. 340 litres. Pressure pipe connection Ø 90 mm.
Aqualift F XL (Single-Channel Impeller)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage (Single-Channel Impeller). The tank volume is approx. 680 litres, the maximum pumping volume is approx. 350 litres. Pressure pipe connection Ø 90 mm.
Aqualift F XL (Dry Set-Up)
Lifting station Aqualift F XL in an Engineering Systems Chamber Ø 1000. For wastewater with or without sewage. High pumping capacity to pump wastewater from basements. Optimum servicing possible due to dry set-up within the chamber. Pressure pipe connection Ø 90 mm.
Pumping stations for wastewater without sewage (grey water)
Aqualift S
Favourably priced pumping station Aqualift S with multi-vane impelleller pumps in compact chamber system Ø 600 mm. Pressure pipe connection Ø 40 mm.
Aqualift S XL
Pumping station Aqualift S XL in an engineering system chamber Ø 1000 mm. For wastewater without sewage or rainwater. Large tank volume of approx. 680 litres in combination with a high pumping capacity to pump wastewater from basements. Pressure pipe connection Ø 40 mm.
Grease Separators
In many commercial and industrial operations such as restaurants, hotels, motorway service areas, butchers or other food-processing plants, greases and oils get into the wastewater. This wastewater has quite a way to travel before it reaches the next sewage plant. A great deal of grease and food residue can become deposited in the drainage system along the way, leading to pipe blockages, corrosion and odour formation as well as problems with the operation of sewage plants and lifting stations. For this reason, legislation requires plants which produce greasy wastewater to install grease separators according to EN 1825! The whole KESSEL range of polyethylene grease separators fulfils all the legal requirements for various installation situations:
Grease separators for free-standing installation
Grease separator EasyClean free
Grease separator EasyClean according to EN 1825 for free-standing installation inside buildings. Available in the nominal sizes NS 2 – NS 30.
Grease separator EasyClean Modular
Grease separator for free-standing installation. Can be split for installation – ideal where access is tight. Available from NS 0,25 up to NS 4.
Grease separators for outdoor underground installation
Grease separator EasyClean ground
Grease separator according to EN 1825 for underground installation outside buildings. Available in the nominal sizes NS 1 – NS 35.